CCCam DVB plugin - v Beta 0.100
 

Yazarın açıklaması;

CCCam serverim yok deneyemedim.

Yet another CCCam CardSharing Client plugin for Windows...

Working either as MD plugin, a DVBCore plugin or as a DVBViewer plugin.

See the "readme.txt" file for the details to install and use it. Briefly, to start just create your server entry into the .ini file using and modifying the following sample to your own needs:

[Serv_whateveryouwishforyourservername]
Server=CCCam:MyServer.com:12000:0:MyUsername:MyPas sword

12000 is the default port for a CCCam server, but you can change it).

It's only a beta version, so if you decide to test it, don't expect a very stable or errorless version.


Just a few more words:

-the multi-server(s) option has not been thoroughly tested,

-cardsharing for NDS/Videoguard cards is a bit tricky to use, because of the very small latency expected for DCW changes. If you don't have a very quick server (i.e. basically your own server on your own LAN), you can expect a lots of glitches each 8-10 seconds. Glitches which may even provoke crashes within your DVB application.

-it you don't get any pictures and sounds, or if you get a lots of glitches or freezings, try to check first if your server is quick enough (especially if you are using nodes with a high hop value)

-in case of troubles or strange results, reset the connection with your server by stopping and re-starting the server (right-click in the servers list, inside the "Monitor" window).

Alıntıdır.........

NOT: Server bilgilerinizi aşagıda vereceğim örnekdeki ini dosyasının en altına yazabilişrsinizgibi yazınız
ÖRNEK
[Serv_whateveryouwishforyourservername]
Server=CCCam:server.dyndns.biz:12000:0:user:pass

server.dyndns.biz : C satırındaki server
12000 : serverın portu
user : kullanıcı adınız
pass : kullanıcı sifreniz
12000 den sonraki 0 olduğu gibi kalsın arkadaşlar.

Kanal geçişleri baya hızlı Flaycccamin ipliğini pazara cıkarır sanıyorum inşallah ilerde buda ücretli olmaz. emeği geçen tüm arkadaşlara teşekkürler ediyorum.

paylaşım için teşekkürler

teşekür ederim usta

usta ne ise yarar bide plugin sami ekleme
ve ne ise yarar su komut tesekurler

pluginin yeni versiyonu 1. mesaja eklenmişdir nds lerde düzenleme yapılmış.

pluginin yeni versiyonu( 0.1.0.3 )ve (0.1.0.4 ) 1. mesaja eklenmişdir

pluginin yeni versiyonu (0.1.0.5 ) 1. mesaja eklenmişdir

Paylaşım için teşekkürler

[Serv_bilgivadisi.net]
Server=CCCam:bilgivadisi.net:15000:0:yilmaz02:test t
Active=1
MaxHop=2

MaxHop=2 yaparsan hop2 kartları aktif olur.Bu arada gelen diğer tüm kartlarıda görebilme şansımız var.
3 yaparsan hop3..........gibi

Ayrıca next 2000 lerede pc aracılığıyla oluyormuş.Burdan yola çıkarak pc yardımı ile diğer cihazlarıda denemek lazım tabi

saygılar

pluginin yeni versiyonu (1.0.0.6) ve (0.1.0.7 ) 1. mesaja eklenmişdir

Changelog:
----------

0.1.0.8:
-the way to ignore/use an available node has changed: right-click now on the node to get the corresponding menu (currently limited to this feature only),
-because of the tremendous number or disconnections/re-connections of some nodes for most of the CCCam servers (especially, but not only, those of version 2.0.11), the restart of the CAID selection process is no more always called. Unless no nodes have been found to decode the current channel; in this last case, the restart is still automatic. In some rare cases, you may have to ask manually to retry all the ECMs,
-Irdeto ECMs are now sent to the CCCam server(s) one at time only (though still currently a workaround),
-a new modification into the CAID selection process, to increase the stability of the decoding process.

Emeğine sağlık üstad. \~~

Hadu - CCCam DVB plugin - version Beta 0.109
 

automatic detection for sssp "wrapper" application (if it's called ssspxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). However, you can always force it, using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-modification to stick as tight as possible to the answer of the server(s) concerning the ECM requests. It may have some negative impacts in some rare situations. In these later cases, stop and restart the concerned server connection,
-new modification for Irdeto ECMs. Only the first positive ChID (i.e. available for decoding purposes) is used, after a first test with all of them.

0.1.1.0:

-several modifications for Irdeto ECMs (once more),
-possibility to 'Log a PID' added (within the main menu),
-bug fix for incorrect statistics in case of Irdeto ECMs,
-"WantEmus" option is now relative to accepting or refusing emulators from server(s): default value is 1=Yes,
-bug fixes for CAID and providers associated to emulators,
-some fixes for improper data send by some "wrapper" applications,
-modification into the ECM time out process,
-time response from server(s) added (2 new columns into the "Server Infos" window). Both for returned DCWs and for negative answers (i.e. 'No decoding' messages), there is a first latency for multiple Irdeto ECMs (if several ChIDs are used),
-some fixes for nodes display in case of more than one server active.

Sağlayıcıları emuletörlerine birleştirmek için hatalar düzeltilmiş.

Changelog:
----------

0.1.1.2:
-bug fix for some CAIDs associated to emulators,
-"NoSID" option added, to ignore one or several SIDs for a server,
-"Enable/Disable (one CAID)" and "Enable/Disable (all CAIDs)" added into the contextual menu for a node (right-click on the node to get the corresponding menu). These menu entries correspond to the "NoNodeCAID" option into Hadu.ini; refer to this option for more details. Note that "Ignore/Use" menu entry is temporary, associated to the current session with the server, and specific to one node. While these two new menu entries are saved (i.e. not temporary), and specific to one server (all the CAIDs for a server = all the nodes belonging to this server) or to one CAID of the server (which may correspond to one or several nodes for the concerned server).

eline saglık üstad

Hadu - CCCam DVB plugin - version Beta 0.113

Changelog:
- minor modification for the connection time out process,
- priority added: general rules (see "PrioGenRules" option) and CAID/provider
for nodes (see "PrioCAIDProv" option),
-modification to accept connection for CCCam servers v2.1.2.

Hadu - CCCam DVB plugin - version Beta 0.114

0.1.1.4:
- added the possibility to cancel the temporarily effects of the manual
ECM PID selection within the server menu (i.e. without the necessity
to change or re-select the channel),
- bug fixes inside the node priority process (introduced into version 0.1.1.3).

Hadu - CCCam DVB plugin - v Beta 0.115.
Changelog:
0.1.1.5:
-added the possibility to use an icon for Hadu in the Systray (see "Systray" menu),
-some minor bug fixes,
-automatic detection for Trumanshare "wrapper" application (if it's called trumanxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). As for Sssp, it's always possible to change it using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-fix for a nasty bug concerning the node selection (still introduced into version 0.1.1.3). The start to decode a new channel should be now faster, mostly of the time (but still not faster than your server(s), of course).

Hadu - CCCam DVB plugin - version Beta 0.116

Changelog:
----------
0.1.1.6:
-added the possibility to modify the maximum number of CAID/node loops (see "MaxCAIDLoops" option),
-bug fix concerning the closing and re-opening of the same ECM PID in some cases,
-bug fix for ECM PID closing requests (not correctly processed in some cases),
-number of timeouts for ECM requests added into the nodes list,
-minor enhancements into ECM request for the same ECM PID.


Additional comment:
Each time it is possible (Alt-DVB2 and DVBDream 1.xx, for instance) set the packet size for plugins to 184 bytes, to minimize the delay for the decoding process.

eline sağlık

Hadu-CCCam_DVB_plugin-v_Beta_0.117

Teşekkürler

teşekkürler

sağolasın teşekkürler

teşekkürler

teşekür ederim usta